Rob's /sun/Sun4u/ Image Archive

Hardware Power ON

@(#) SPARCengine(tm)Ultra(tm) AXi  3.10.4 SME created 1998/03/04 17:22
Probing for keyboard entry to skip POST 
Enter Checking KB 
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB Done
%o0 = 0000.0000.0000.4001

Executing Power On SelfTest

SPARCengine(tm)Ultra(tm) AXi POST 1.8 SME  Dated/03/04/98
        Turning on the Optional Fans

Probing system keyboard : Done
Time Stamp [hour:min:sec] 02:02:20

Init POST BSS
        Init System BSS
DMMU TLB Tags
        DMMU TLB Tag Access Test
DMMU TLB RAM
        DMMU TLB RAM Access Test
Ecache Tests
        Probe Ecache
        ecache_size = 0x00080000
        Ecache RAM Addr Test
        Ecache Tag Addr Test
        Ecache RAM Test
        Ecache Tag Test
        Invalidate Ecache Tags
All CPU Basic Tests
        V9 Instruction Test
        CPU Tick and Tick Compare Reg Test
        CPU Soft Trap Test
        CPU Softint Reg and Int Test
All Basic MMU Tests
        DMMU Primary Context Reg Test
        DMMU Secondary Context Reg Test
        DMMU TSB Reg Test
        DMMU Tag Access Reg Test
        DMMU VA Watchpoint Reg Test
        DMMU PA Watchpoint Reg Test
        IMMU TSB Reg Test
        IMMU Tag Access Reg Test
        IMMU TLB RAM Access Test
        IMMU TLB Tag Access Test
All Basic Cache Tests
        Dcache RAM Test
        Dcache Tag Test
        Icache RAM Test
        Icache Tag Test
        Icache Next Test
        Icache Predecode Test
Sabre MCU Control & Status Regs Init and Tests
        Init Sabre MCU Control & Status Regs
        CPU speed : 300 Mhz, mc1 set : 0x06459acb
Memory Probe and Init
        Probe Memory
                INFO: All the memory Group in 10 bit column mode
                Group 0: 128MB
                Group 1: 128MB
                Group 2: 128MB
                Group 3: 128MB
        Malloc Post Memory
        Init Post Memory
.........
        Memory Addr w/ Ecache
        Map PROM/STACK/NVRAM in DMMU
        Load Post In Memory
        Run POST from MEM
        .........
        loaded POST in memory 
        Update Master Stack/Frame Pointers
All FPU Basic Tests
        FPU Regs Test
        FPU State Reg Test
        FPU Functional Test
        FPU Trap Test
Memory Tests
        Init Memory
...............
................
................
................
        Memory Addr w/ Ecache Test
        ECC Memory Addr Test
        Block Memory Addr Test
        Block Memory Test
...............
...............

................
................

................
................

................
................

        ECC Blk Memory Test
...............
...............

................
................

................
................

................
................

All Basic SabreIO Tests
        Init SabreIO
        PIO Decoder and BCT Test
        PCI Byte Enable Test
        SabreIO IOMMU Regs Test
        Sabre IOMMU RAM NTA Test
        Sabre IOMMU CAM NTA Test
        Sabre IOMMU RAM Address Test
        Sabre IOMMU CAM Address Test
        IOMMU TLB Compare Test
        IOMMU TLB Flush Test
        PBM Control/Status Reg Test
        PBM Diag Reg Test
        Sabre IO Regs Test
All Advanced CPU Tests
        DMMU Hit/Miss Test
        DMMU Little Endian Test
        IU ASI Access Test
        FPU ASI Access Test
        Ecache Thrash Test
All CPU Error Reporting Tests
        CPU Addr Align Trap Test
        DMMU Access Priv Page Test
        DMMU Write Protected Page Test
All Advanced SabreIO Tests
        Init SabreIO
        Consist DMA Wr, IOMMU hit Ebus Test
All Basic Cheerio Tests
        Cheerio Ebus PCI Config Space Test
        Cheerio Ethernet PCI Config Space Test
        Cheerio Ebus Engine Reg Test
        Cheerio Init
All Basic Ras Tests
        Init i2c bus
        Thermister Reading Test
        Thermister Position       Readings (in Hex)
        CPU                       0xff
        Under Module              0xff
        PCI                       0xff
        Disk                      0xff

Status of this POST run:        PASS
manfacturing mode=OFF

Power On Selftest Completed
Software Power ON0.0000.0000.0000 ffff.ffff.f00d.40c8 019f.3333.0a50.0011

@(#) SPARCengine(tm)Ultra(tm) AXi  3.10.4 SME created 1998/03/04 17:22
Enter Checking KB 
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB 
Clearing E$ Tags  Done
Clearing I/D TLBs Done
Probing Memory 
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0008
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0008
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0008
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0008
Done
MEM BASE = 0000.0000.1800.0000
MEM SIZE = 0000.0000.0800.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.261c
PC = 00000000000.60
Decompressing into Memory Done
Size = 000000000007.75
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 
UltraSPARC-IIi Version 1 .2  2-2 module
Advanced PCI Bridge Version 1 .1 
Probing Memory Group #0  64 +  64 : 128 Megabytes
Probing Memory Group #1  64 +  64 : 128 Megabytes
Probing Memory Group #2  64 +  64 : 128 Megabytes
Probing Memory Group #3  64 +  64 : 128 Megabytes
Environmental monitoring:  Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done

Probing Floppy: manual eject on ID1
Probing UPA Slot at 1e,0 SUNW,ffb 
Probing /pci@1f,0/pci@1,1 at Device 1  pci108e,1000 network 
Probing /pci@1f,0/pci@1,1 at Device 2  Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3  Nothing there
Probing /pci@1f,0/pci@1,1 at Device 4  Nothing there
Probing /pci@1f,0/pci@1 at Device 1  scsi disk tape scsi disk tape 
Probing /pci@1f,0/pci@1 at Device 2  ATI,Video-Xpression 
Probing /pci@1f,0/pci@1 at Device 3  Nothing there
Probing /pci@1f,0/pci@1 at Device 4  Nothing there
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 
UltraSPARC-IIi Version 1 .2  2-2 module
Advanced PCI Bridge Version 1 .1 
Probing Memory Group #0  64 +  64 : 128 Megabytes
Probing Memory Group #1  64 +  64 : 128 Megabytes
Probing Memory Group #2  64 +  64 : 128 Megabytes
Probing Memory Group #3  64 +  64 : 128 Megabytes
Environmental monitoring:  Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done

Probing Floppy: manual eject on ID1
Probing UPA Slot at 1e,0 SUNW,ffb 
Probing /pci@1f,0/pci@1,1 at Device 1  pci108e,1000 network 
Probing /pci@1f,0/pci@1,1 at Device 2  Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3  Nothing there
Probing /pci@1f,0/pci@1,1 at Device 4  Nothing there
Probing /pci@1f,0/pci@1 at Device 1  scsi disk tape scsi disk tape 
Probing /pci@1f,0/pci@1 at Device 2  ATI,Video-Xpression 
Probing /pci@1f,0/pci@1 at Device 3  Nothing there
Probing /pci@1f,0/pci@1 at Device 4  Nothing there

SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 300MHz), No Keyboard
OpenBoot 3.10.4 SME, 512 MB memory installed, Serial #8382928.
Ethernet address 8:0:20:7f:e9:d0, Host ID: 807fe9d0.

Boot device: disk  File and args: -v                                  
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54. 
FCode UFS Reader 1.12 00/07/17 15:48:16. 
Loading: /platform/SUNW,UltraSPARC-IIi-Engine/ufsboot
Loading: /platform/sun4u/ufsboot
Size: 5a050+1477a+0x249ba Bytes
SunOS Release 5.9 Version Generic_112233-06 64-bit
Copyright 1983-2002 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Ethernet address = 8:0:20:7f:e9:d0
mem = 524288K (0x20000000)
avail mem = 506568704
root nexus = SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 300MHz)
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
/pci@1f,0/pci@1/scsi@1 (glm0):
        Rev. 5 Symbios 53c876 found.
PCI-device: scsi@1, glm0
glm0 is /pci@1f,0/pci@1/scsi@1
/pci@1f,0/pci@1/scsi@1,1 (glm1):
        Rev. 5 Symbios 53c876 found.
PCI-device: scsi@1,1, glm1
glm1 is /pci@1f,0/pci@1/scsi@1,1
sd0 at glm0: target 0 lun 0
sd0 is /pci@1f,0/pci@1/scsi@1/sd@0,0
sd1 at glm0: target 1 lun 0
sd1 is /pci@1f,0/pci@1/scsi@1/sd@1,0
sd6 at glm0: target 6 lun 0
sd6 is /pci@1f,0/pci@1/scsi@1/sd@6,0
WARNING: Device sd6 failed to power up.
WARNING: Please see your system administrator or reboot.
root on /pci@1f,0/pci@1/scsi@1/disk@0,0:a fstype ufs
PCI-device: ebus@1, ebus0
ebus0 is /pci@1f,0/pci@1,1/ebus@1
su_pnp0 at ebus0: offset 14,3803f8
su_pnp0 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3803f8
su_pnp1 at ebus0: offset 14,3602f8
su_pnp1 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3602f8
se0 at ebus0: offset 14,400000
se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000
cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x12 clock 300 MHz)
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
PCI-device: network@1,1, hme0
hme0 is /pci@1f,0/pci@1,1/network@1,1
configuring IPv4 interfaces: hme0 hme0:1.
Hostname: home
dump on /dev/dsk/c0t0d0s1 size 512 MB
SUNW,hme0 : Internal Transceiver Selected.
SUNW,hme0 :   100 Mbps Full-Duplex Link Up
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
ffb0 at root: UPA 0x1e 0x0
ffb0 is /SUNW,ffb@1e,0
The system is coming up.  Please wait.
/dev/rdsk/c0t0d0s7 already mounted
checking ufs filesystems
/dev/rdsk/c0t1d0s2: is logging.
mount: /dev/dsk/c0t0d0s7 is already mounted, /var is busy,
        or the allowable number of mount points has been exceeded
Feb 19 21:05:52 su: 'su sys' succeeded for root on /dev/console
/dev/tsalarm:ctl: No such file or directory
Can't open device
starting rpc services: rpcbind done.
Setting netmask of hme0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway home
syslog service starting.
Feb 19 21:05:57 home pseudo: pseudo-device: tod0
Feb 19 21:05:57 home genunix: tod0 is /pseudo/tod@0
Feb 19 21:05:57 home pseudo: pseudo-device: pm0
Feb 19 21:05:57 home genunix: pm0 is /pseudo/pm@0
volume management starting.
add net 144.54.0.0: gateway 144.54.59.1
add net 149.59.0.0: gateway 144.54.59.1
The system is ready.
Feb 19 21:06:01 home pseudo: pseudo-device: vol0
Feb 19 21:06:01 home genunix: vol0 is /pseudo/vol@0
Running in IDS mode
Log directory = .

Initializing Network Interface hme0

        --== Initializing Snort ==--
Initializing Output Plugins!
Decoding Ethernet on interface hme0
Initializing Preprocessors!
Initializing Plug-ins!
Parsing Rules file ../etc/snort.conf

+++++++++++++++++++++++++++++++++++++++++++++++++++
Initializing rule chains...
No arguments to frag2 directive, setting defaults to:
    Fragment timeout: 60 seconds
    Fragment memory cap: 4194304 bytes
    Fragment min_ttl:   0
    Fragment ttl_limit: 5
    Fragment Problems: 0
    Self preservation threshold: 500
    Self preservation period: 90
    Suspend threshold: 1000
    Suspend period: 30
Stream4 config:
    Stateful inspection: ACTIVE
    Session statistics: INACTIVE
    Session timeout: 30 seconds
    Session memory cap: 8388608 bytes
    State alerts: INACTIVE
    Evasion alerts: INACTIVE
    Scan alerts: ACTIVE
    Log Flushed Streams: INACTIVE
    MinTTL: 1
    TTL Limit: 5
    Async Link: 0
    State Protection: 0
    Self preservation threshold: 50
    Self preservation period: 90
    Suspend threshold: 200
    Suspend period: 30
Stream4_reassemble config:
    Server reassembly: INACTIVE
    Client reassembly: ACTIVE
    Reassembler alerts: ACTIVE
    Ports: 21 23 25 53 80 110 111 143 513 1433 
    Emergency Ports: 21 23 25 53 80 110 111 143 513 1433 
http_decode arguments:
    Unicode decoding
    IIS alternate Unicode decoding
    IIS double encoding vuln
    Flip backslash to slash
    Include additional whitespace separators
    Ports to decode http on: 80 
rpc_decode arguments:
    Ports to decode RPC on: 111 32771 
    alert_fragments: INACTIVE
    alert_large_fragments: ACTIVE
    alert_incomplete: ACTIVE
    alert_multiple_requests: ACTIVE
telnet_decode arguments:
    Ports to decode telnet on: 21 23 25 119 
Using LOCAL time
1779 Snort rules read...
1779 Option Chains linked into 230 Chain Headers
0 Dynamic rules


Click on any of the images below for a better view. The number under the image is the size of the better view in bytes followed by the date it was last edited and its name. Click on the name to view the jpeg header. Click back in your browser to return to this index or the parent of this archive has more images too.



667K Apr 2 18:30 u2.jpg

1.2M Apr 2 18:26 u1.jpg

233K Apr 2 18:26 u3.jpg


This 338 index.shtml was served for rob.com (207.170.160.160) via (none) on Sunday, 04-Apr-2004 17:07:09 EDT using Wget/1.7 last edited by rob on Monday, 15-Mar-2004 14:04:13 EST.