Filesystem Size Used Avail Capacity Mounted on /dev/ufs/pfsense0 1.8G 182M 1.5G 11% / devfs 1.0K 1.0K 0B 100% /dev /dev/md0 38M 56K 35M 0% /tmp /dev/md1 58M 14M 39M 26% /var /dev/ufs/cf 49M 64K 45M 0% /cf devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev re0: flags=8843 metric 0 mtu 1500 options=18 ether 80:ee:73:52:ef:35 inet6 fe80::82ee:73ff:fe52:ef35%re0 prefixlen 64 scopeid 0x1 inet 10.1.1.57 netmask 0xffffff00 broadcast 10.1.1.255 nd6 options=43 media: Ethernet autoselect (1000baseT ) status: active re1: flags=8843 metric 0 mtu 1500 options=18 ether 80:ee:73:52:ef:36 inet6 fe80::82ee:73ff:fe52:ef36%re1 prefixlen 64 scopeid 0x2 inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=43 media: Ethernet autoselect (1000baseT ) status: active pflog0: flags=100 metric 0 mtu 33664 lo0: flags=8049 metric 0 mtu 16384 options=3 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 nd6 options=43 pfsync0: flags=0<> metric 0 mtu 1460 syncpeer: 224.0.0.240 maxupd: 128 syncok: 1 enc0: flags=0<> metric 0 mtu 1536 Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE-p13 #0: Sat Dec 8 00:15:55 EST 2012 root@snapshots-8_1-amd64.builders.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_wrap_vga.8.amd64 amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (3292.54-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a Stepping = 9 Features=0xbfebfbff Features2=0x359ae3bf,SSE4.1,SSE4.2,POPCNT,,XSAVE,,> AMD Features=0x28100800 AMD Features2=0x1 TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8154673152 (7776 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8040af20, 0) error 1 wlan: mac acl policy registered ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8040afc0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8040b060, 0) error 1 wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80589520, 0) error 1 kbd1 at kbdmux0 cryptosoft0: on motherboard padlock0: No ACE support. acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 67, 1 (4) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 pci0: at device 22.0 (no driver attached) ehci0: mem 0xf7d08000-0xf7d083ff irq 16 at device 26.0 on pci0 ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: on ehci0 pci0: at device 27.0 (no driver attached) pcib2: irq 16 at device 28.0 on pci0 pci2: on pcib2 pcib3: irq 17 at device 28.1 on pci0 pci3: on pcib3 re0: port 0xe000-0xe0ff mem 0xf0104000-0xf0104fff,0xf0100000-0xf0103fff irq 17 at device 0.0 on pci3 re0: version:1.81 re0: Ethernet address: 80:ee:73:52:ef:35 This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625. re0: [ITHREAD] pcib4: irq 18 at device 28.2 on pci0 pci4: on pcib4 pci4: at device 0.0 (no driver attached) pcib5: irq 19 at device 28.3 on pci0 pci5: on pcib5 re1: port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci5 re1: version:1.81 re1: Ethernet address: 80:ee:73:52:ef:36 This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625. re1: [ITHREAD] ehci1: mem 0xf7d07000-0xf7d073ff irq 23 at device 29.0 on pci0 ehci1: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci1 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d06000-0xf7d067ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.30 controller with 4 3Gbps ports, PM not supported pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] atkbd: unable to set the command byte. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range acpi_perf0: on cpu0 Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Root mount waiting for: usbus1 usbus0 ugen0.1:u g u sa0t usbus1 uhub0: on usbus0 uhub1: on usbus1 Root mount waiting for: usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: at usbus1 uhub2: on usbus1 ugen0.2: at usbus0 uhub3: on usbus0 uhub3: 4 ports with 4 removable, self powered uhub2: 6 ports with 6 removable, self powered ugen0.3: at usbus0 umass0: on usbus0 ugen1.3: at usbus1 uhub4: on usbus1 Root mount waiting for: usbus1 usbus0 uhub4: 4 ports with 4 removable, self powered (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present ugen1.4: at usbus1 uhub5: on usbus1 Root mount waiting for: usbus1 uhub5: 3 ports with 2 removable, bus powered ugen1.5: at usbus1 ukbd0: on usbus1 kbd2 at ukbd0 ugen1.6: at usbus1 Root mount waiting for: usbus1 ugen1.7: at usbus1 umass1: on usbus1 Root mount waiting for: usbus1 da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: < Patriot Memory PMAP> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: 7640MB (15646720 512 byte sectors: 255H 63S/T 973C) GEOM: da1s1: geometry does not match label (16h,63s != 255h,63s). GEOM: da1s2: geometry does not match label (16h,63s != 255h,63s). Trying to mount root from ufs:/dev/ufs/pfsense0 pflog0: promiscuous mode enabled